Tradcanvas High-Type Car Side Awning
The spacious living space of this attractive car side awning is compatible with high type large minivans. It can be easily attached to the vehicle body and, when connected, can be accessed from three directions. It uses a sturdy and lightweight aluminum frame and is equipped with a mud skirt at the hem to prevent rain from penetrating the awning. Compact and easy to store and carry.
This wide-type side awning, which allows smooth traffic between the car and the tarp, is a high type specification that can be attached to large minivans (~210cm). It is ideal for overnight stays in a car as it provides a large living space. Entrance and exit is possible from three directions (front and two side locations).
The 7001 aluminum alloy used for the frame is light and strong. It is rust-resistant and is also used in jet aircraft.
LOGOS has developed its own high-performance mesh, "Devilblock ST," which has a UV-cut and light-blocking rate approximately 1.5 times higher than normal mesh. The fine mesh prevents even small insects from entering.
Equipped with mud skirts to protect against rain, wind and cold.
Includes 2 joints for connecting car bodies. The joints are fixed by collapsing the hooks of the joint suction cups, and setting up is easy since all you have to do is pull the sheet.
Canopy can be extended by using poles and ropes (sold separately). *Separately sold items are subject to discontinuation without notice.
It comes with a special storage bag for easy carrying.
Size: (Approx.) 320 cm (W) x 250 cm (D) x 210 cm (H)
Storage size: (approx.) 15 cm (length) x 63 cm (width) x 15 cm (height)
Water pressure resistance: 2000mm
Composition: Seat, main frame, ridge frame, pegs, storage bag, storage bag for frame, hammer, accessory bag
Main materials:
［Frame] 7001 aluminum alloy
［Sheet] Flame-retardant bulky polyester
［Mesh: Devilblock ST
Performance/Features:
［Sheet] Devilblock ST, waterproof, water-repellent, flame-retardant, UV-CUT, full mud skirt, fly door and mesh, ventilation, rotating zipper
［Frame] 7001 aluminum alloy
Flame retardant finish: Conforms to U.S. Standard CPAI-84
The pegs and hammer included with this product are intended for use in a cleared environment with no wind and sunny skies.
If you intend to use the product in inclement weather or on uneven terrain, please purchase a product with specifications appropriate for the conditions.
The spacious living space of this attractive car side awning is compatible with high type large minivans. It can be easily attached to the vehicle body and, when connected, can be accessed from three directions. It uses a sturdy and lightweight aluminum frame and is equipped with a mud skirt at the hem to prevent rain from penetrating the awning. Compact and easy to store and carry.
This wide-type side awning, which allows smooth traffic between the car and the tarp, is a high type specification that can be attached to large minivans (~210cm). It is ideal for overnight stays in a car as it provides a large living space. Entrance and exit is possible from three directions (front and two side locations).
The 7001 aluminum alloy used for the frame is light and strong. It is rust-resistant and is also used in jet aircraft.
LOGOS has developed its own high-performance mesh, "Devilblock ST," which has a UV-cut and light-blocking rate approximately 1.5 times higher than normal mesh. The fine mesh prevents even small insects from entering.
Equipped with mud skirts to protect against rain, wind and cold.
Includes 2 joints for connecting car bodies. The joints are fixed by collapsing the hooks of the joint suction cups, and setting up is easy since all you have to do is pull the sheet.
Canopy can be extended by using poles and ropes (sold separately). *Separately sold items are subject to discontinuation without notice.
It comes with a special storage bag for easy carrying.
Size: (Approx.) 320 cm (W) x 250 cm (D) x 210 cm (H)
Storage size: (approx.) 15 cm (length) x 63 cm (width) x 15 cm (height)
Water pressure resistance: 2000mm
Composition: Seat, main frame, ridge frame, pegs, storage bag, storage bag for frame, hammer, accessory bag
Main materials:
［Frame] 7001 aluminum alloy
［Sheet] Flame-retardant bulky polyester
［Mesh: Devilblock ST
Performance/Features:
［Sheet] Devilblock ST, waterproof, water-repellent, flame-retardant, UV-CUT, full mud skirt, fly door and mesh, ventilation, rotating zipper
［Frame] 7001 aluminum alloy
Flame retardant finish: Conforms to U.S. Standard CPAI-84
The pegs and hammer included with this product are intended for use in a cleared environment with no wind and sunny skies.
If you intend to use the product in inclement weather or on uneven terrain, please purchase a product with specifications appropriate for the conditions.